Visible dye penetrant inspection materials indicating any defects open to the surfaces of all kinds of materials in "RED".
Accurate and reliable: DPT is a highly accurate and reliable method for detecting surface-breaking defects in a wide range of materials.Non-destructive: DPT is a non-destructive testing method, which means that it won't alter the material being tested and preserves its integrity for further use or inspection.Cost-effective:
DPT is Versatile Easy to use: DPT is easy to perform and does not require any specialized equipment or training, making it accessible to a wide range of customers.
Complementary to other testing methods: DPT can be used in conjunction with other non-destructive testing methods to provide a more comprehensive assessment of the material.
Improves quality control: By detecting surface-breaking defects early on, DPT helps improve quality control and prevent potential failure of the material.
Visible dye penetrant inspection allows the user to detect defects open to the surface and through cracks easily using penetrant, developer, and remover. On all kinds of inspection objects, the penetrant, developer, and remover draw clear and accurate patterns of the defects, if any, in "RED" against the "WHITE" background. Various types of RED MARK are provided for different applications. All solvent removal materials except non-flammable type and high-temperature type are not applied to Pollutant Release and Transfer Register. All materials of water-washable penetrant "plus series" are not applied to Pollutant Release and Transfer Register.
Dye Penetrant Testing"RED MARK"
SOLVENT REMOVABLE TYPE
You can see it by scrolling horizontally.
| REGULAR TYPE | Penetrant | R-1A(NT) |
|---|---|---|
| Developer | R-1S(NT) | |
| Remover | R-1M(NT) | |
| AMS/MIL APPROVAL TYPE In accordance with AMS 2644,MIL-I-25135 |
Penetrant | R-1A(NT)/1 |
| Developer | R-1S(NT)/1 | |
| Remover | R-1M(NT)/1 | |
| LOW HALOGEN/SULFUR TYPE Compatible with stainless steel, Ni, Ti, alloys |
Penetrant | R-1A(NT) Special |
| Developer | R-1S(NT) Special | |
| Remover | R-1M(NT) Special | |
| NON-FLAMMABLE TYPE (HFC is used ) |
Penetrant | RF-1A |
| Developer | RF-1S | |
| Remover | RF-1M | |
| HIGH TEMPERATURE TYPE Used for hot surfaces(90-200) |
Penetrant | R-1AH(NT) |
| Developer | R-1SH(NT) | |
| Remover | R-1MH(NT) |
WATER WASHABLE PENETRANT
You can see it by scrolling horizontally.
| REGULAR TYPE | R-3B(NT) PLUS | Used for casting, key groove, and screw parts. |
|---|---|---|
| LOW HALOGEN/SULFUR TYPE | R-3B(NT) Special PLUS | Used for welding bead on stainless steel and Ti-alloys. |
| WATER BASE TYPE | R-3B(NT) W-1 PLUS | Used for raw materials like slab. Non-flammable. |
SPECIAL DEVELOPER
You can see it by scrolling horizontally.
| EASY REMOVABLE TYPE | R-1SB | Easy removal of developer coating after inspection. |
|---|---|---|
| FAST DRYING TYPE | R-1SD(NT) R-1SD(NT) Special |
Used at high humidity, low temperature. Low halogen/sulfur. |
| WATER SUSPENDABLE TYPE | R-3W | Developer particles should be suspended in water. Non-flammable. |
| PASTE TYPE | DP-1S | Applied with sprayer. High viscosity, non-flammable. |
SPECIAL REMOVER
You can see it by scrolling horizontally.
| SLOW DRYING TYPE | R-1MS(NT) 2 R-1MS(NT) Special 2 |
Volatilization speed is slow. Low halogen/sulfur. |
|---|---|---|
| WATER AEROSOL TYPE | R-3M(NT) R-3M(NT) Special |
Pure water is filled into aerosol. Low halogen/sulfur. |
Container
Aerosol type : a set of six cans (one penetrant, two developers, and three removers)
Can size : 3.8L, 18 L
Shipping Unit
Aerosol type : four, six or eight set packages in a Cardboard box
3.8 L Can type : two or four Cans in a Cardboard box
18 L Can type :one Cans in a Cardboard box