Fluorescent Penetrant Inspection"NEO GLO"
Ideal for detecting fine defects. Fluorescent patterns of defects more perceptible to naked eye.
Fluorescent Penetrant Testing (FPT) is another type of penetrant testing, similar to Dye Penetrant Testing (DPT). Both methods are used to detect surface-breaking defects in a wide range of materials. However, there are some key differences between the two. Here are some advantages of FPT compared to DPT:
-
Increased sensitivity: FPT has higher sensitivity compared to DPT, allowing for the detection of smaller defects that might be missed by DPT.
-
Improved visualization: FPT uses a UV light source to illuminate the material being tested, which enhances the visualization of defects compared to DPT. This makes it easier for the inspector to identify defects and reduces the chance of missed defects.
-
Faster inspection: FPT typically requires less time for the inspection process compared to DPT, as the visualization of defects is improved.
-
Better portability: FPT systems are usually smaller and more portable compared to DPT systems, making it easier to perform inspections on-site.
Overall, while both DPT and FPT have their advantages, FPT is generally considered to be more sensitive, easier to use, and more efficient compared to DPT.
NEO GLO have been proved to be reliable penetrants under honor of authentication awarded by: U.S. Air Force, Japan Air Self Defense Force, Aircraft manufacturers in U.S. and U.K., etc. Their scope has been extended to inspections for automobile components, new materials, semiconductors, and rocket parts.
TYPES AND USES OF PENETRANT
LOW SENSITIVITY FLUORESCENT WATER WASHABLE PENETRANTS
You can see it by scrolling horizontally.
| F-4A/3 (AMS 2644 approved) |
Casting, raw material parts and steels. | Technical data sheet |
|---|---|---|
| F-4A-Au PLUS | Machine parts, automobile parts. | |
| FWB3 | Coarse surface, ceramics, plastic, porous materials. | |
| FWB3C | Concentrated type, Coarse surface, ceramics, plastic, porous materials. |
MEDIUM SENSITIVITY FLUORESCENT WATER WASHABLE PENETRANTS
You can see it by scrolling horizontally.
| F-4A-B/3 (AMS 2644 approved) |
Machine parts, automobile parts, plants, forging, welding. | Technical data sheet |
|---|---|---|
| F-4A-B PLUS (T) | ||
| F-4A-C PLUS |
HIGH SENSITIVITY FLUORESCENT WATER WASHABLE PENETRANTS
You can see it by scrolling horizontally.
| F-4A-C/3 (AMS 2644 approved) |
Machine process finished surface, very smooth surface. | Technical data sheet |
|---|---|---|
| F-4A-E PLUS |
ULTRA HIGH SENSITIVITY FLUORESCENT WATER WASHABLE PENETRANTS
You can see it by scrolling horizontally.
| F-4A-E/3 (AMS 2644 approved) |
Special parts, stainless steel, Ti, Ni, Co, Mo, and their alloys. | Technical data sheet |
|---|
FLUORESCENT POST-EMULSIFIABLE PENETRANTS
You can see it by scrolling horizontally.
| F-5L-SP/3 (AMS 2644 approved) |
MEDIUM SENSITIVITY | Machine parts,aircraft, automobile parts,precisioncasting and forging | Technical data sheet |
|---|---|---|---|
| F-6A/3 (AMS 2644 approved) |
HIGH SENSITIVITY | Technical data sheet | |
| F-6A-SP/3 (AMS 2644 approved) |
ULTRA HIGH SENSITIVITY | Technical data sheet |
Separate-type water washable fluorescent penetrants
Easy to recycle and treat wastewater
You can see it by scrolling horizontally.
| FB-3100KR | LOW SENSITIVITY |
|---|---|
| FB-3100C | MEDIUM SENSITIVITY |
| FB-3500A | HIGH SENSITIVITY |
Emulsifiers
You can see it by scrolling horizontally.
| F-5E-SP/3 (AMS 2644 approved) |
Lipophilic | Technical data sheet |
|---|---|---|
| F-6E-W/3 (AMS 2644 approved) |
Hydrophilic | Technical data sheet |
Developers
You can see it by scrolling horizontally.
| F-5D/1 (AMS 2644 approved) |
Dry powder | Technical data sheet |
|---|---|---|
| F-4W-SP/1 (AMS 2644 approved) |
Water suspendable | |
| F-4S(NT) | Fast drying | |
| F-4S(NT)/1 (AMS 2644 approved) |
Technical data sheet | |
| RF-1S (AMS 2644 approved) |
Non-flammable |
Removers
Non-flammableYou can see it by scrolling horizontally.
| R-1M(NT) (AMS 2644 approved) |
Flammable | |
|---|---|---|
| R-1M(NT)/1 (AMS 2644 approved) |
||
| RF-1M | Non-flammable |
Container
Penetrants, Emulsifiers, Fast-drying Developers,
Aerosol cans for fast drying type of developer and remover are provided.
Removers・・・・・・・・・・・ ・ 3.8L, 18L Can
Dry Developers・・・・・・・・・・1kg, 2kg in a Cardboard box
Water suspendable Developer・・・ 1kg Can, 6 kg in a Cardboard box